Pricing Search Start free trial
← All guides

How to Read a TAF Aviation Weather Forecast

Last updated: July 2026

A TAF (Terminal Aerodrome Forecast) is the standardized airport weather forecast. Issued under ICAO Annex 3, it uses the same coded vocabulary as a METAR but projects conditions forward over a validity window — typically 24 to 30 hours — using change groups for expected transitions. Pilots and dispatchers use TAFs to plan fuel, alternates and diversions before departure. This guide decodes each part.

Example TAF

TAF EGLL 151100Z 1512/1618 24012KT 9999 SCT035 BECMG 1518/1520 27018G30KT TEMPO 1600/1606 6000 -RA BKN012 PROB30 1602/1605 3000 RADZ BKN008

1

Read the header and station

A TAF starts with "TAF" (optionally "TAF AMD" for amended or "TAF COR" for corrected), then the four-letter ICAO airport code. In our example, EGLL is London Heathrow. An amended TAF supersedes the previous one for that airport.

2

Read the issue time

The next group is six digits followed by Z: day of month plus time in UTC (Zulu). 151100Z means the forecast was issued on the 15th at 11:00 UTC. TAFs are typically issued every 6 hours (00, 06, 12, 18 UTC).

3

Read the validity period

A group of the form DDHH/DDHH gives the forecast window. 1512/1618 means valid from the 15th at 12:00 UTC to the 16th at 18:00 UTC — a 30-hour period. Everything after this describes the expected conditions across that window.

4

Decode the base forecast

The prevailing conditions use the same vocabulary as a METAR: wind (24012KT = from 240 degrees at 12 knots), visibility (9999 = 10 km or more), weather, and cloud (SCT035 = scattered cloud at 3,500 feet). This is the expected baseline until a change group modifies it.

5

Read FM (FROM) — a rapid, permanent change

FM followed by DDHHMM marks a rapid, lasting change from that exact time. FM151800 means "from 18:00 on the 15th, conditions change to what follows and stay that way" — it replaces the previous line entirely until the next change group.

6

Read BECMG (BECOMING) — a gradual change

BECMG DDHH/DDHH marks a gradual transition over the stated window. BECMG 1518/1520 27018G30KT means the wind gradually becomes 270 at 18 gusting 30 knots between 18:00 and 20:00 on the 15th, then persists.

7

Read TEMPO and PROB — temporary and probable variations

TEMPO DDHH/DDHH marks temporary fluctuations, each lasting under an hour and in total under half the period (TEMPO 1600/1606 6000 -RA = brief spells of 6 km visibility in light rain between 00:00 and 06:00 on the 16th). PROB30 or PROB40 give the percentage chance of an alternative scenario (PROB30 1602/1605 3000 RADZ = a 30% chance of 3 km in rain and drizzle in that window).

8

Apply it to route and diversion planning

Read the whole TAF as a timeline: baseline, then each change group in order. Dispatchers use the validity window to confirm the forecast covers the estimated time of arrival plus holding, and use TEMPO/PROB groups to decide whether an alternate airport is required. A TAF that forecasts conditions below approach minima during your arrival window is a direct trigger to carry extra fuel or file an alternate.